LST Smoke Alarm GIF8 1 User Manual

Conventiona

etecto

nterface

GIF8-1

• For the connection of 8 detector

lines in addressable conventional

technology

• Individual detector addressing with

optional address module

• Individual setting of detector zone

function

• Lines monitored for wire breakage,

short circuit, and short to earth

Description

The Conventional Detector Interface GIF8-1 supports call point, automatic ﬁre detector with or without alarm

eight detector zones in addressable conventional tech- veriﬁcation, fault message contacts as well as contacts

nology in Fire Detection Control Panels Series BC216. for technical messages), the function of the detector

Up to 64 detectors (addresses) per detector line can zone can be set separately for each detector line.

be individually identiﬁed with the aid of an address mo-

dule.

The Conventional Detector Interface provides a proces-

sor of its own. At a possible central processing board

In the event of an alarm, the ﬁre detection control panel failure, the diversiﬁed redundancy concept thus ensures

indicates the number of the detector that is activated reliable alarm recognition. Each input of the Conventio-

ﬁrst and displays the optionally parameterised text in- nal Detector Interface is protected against overvoltage

formation. Depending on the type of detector (manual and thus provides high system stability.

Building Safety. Building Security.

GIF8-1_DBL_LST_EN_0804.PDF • PAGE 1