Lennox Hearth Appliance Trim Kit 506033 13 User Manual

HEARTH PRODUCTS

KITS AND ACCESSORIES

506033-13

REV. NC 12/2008

BRICK PANEL KITS

BELLA™

INSTALLATION INSTRUCTIONS FOR BRICK PANEL KITS

FOR USE WITH THE BELLA™ PELLET STOVE

KIT CONTENTS (See Figure 1)

GENERAL INFORMATION

1 ea. Left Side Brick Panel (item 1)

1 ea. Right Side Brick Panel (item 2)

1 ea. Back Brick Panel (item 3)

All of these parts may scratch and bend, great care should be used in

handling them.

1 ea. Left Brick Panel Bracket (item 4)

1 ea. Right Brick Panel Bracket (item 5)

2 ea. 10-24 x 3/8” Socket Head Screws (item 6)

1 ea. Instruction Sheet

If you encounter any problems, need clariﬁcation of these instructions or

are not qualiﬁed to properly install this kit, contact you local distributor

or dealer. Read this instruction sheet in its entirety before beginning the

installation. Failure to understand and follow these directions may result

in damage to the brick panels.

Cat. #

H3484

Model

Description

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND OP-

ERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE

INSTRUCTIONS.

BELLA-BPK-T

Brick Panel Kit, Traditional

TOOLS NEEDED

TURN OFF THE STOVE AND ALLOW IT TO COMPLETELY COOL BEFORE

PROCEEDING.

5/32” Allen Wrench

INSTALLATION INSTRUCTIONS

Step 1. Open front glass door and remove burn-pot.

Step 2. Locate the socket head screw in the inside of the ﬁrebox (see Figure

2) and remove with 5/32” allen wrench.

Step 3. Repeat step 2 on opposite side.

Figure 1 - Kit Contents

Figure 2

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.