connections
specifications
important safety instructions
Read Instructions — Safety and operating instructions should be read prior to
use.
Make all other connections before you connect the
power supply to standard AC power.
Input Voltage .................................................................................120VAC
Input Frequency ............................................................................... 60 Hz
22-508
Retain Instructions — The safety and operating instructions should be retained
for future reference.
13.8VDC 15A Power Supply
connect device with positive and negative wires
1. Turn off the device requiring power.
2. Turn off the power supply.
Output Voltage ............................................................................ 13.8VDC
±0.7 Volts
Heed Warnings — Follow all warnings on the appliance and in the instructions.
Cleaning — Unplug this appliance from the wall outlet before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
Your RadioShack 13.8 VDC 15-Amp Regulated
Power Supply is designed to power equipment
that requires 12V DC automotive power. The power
supply converts standard 120V AC household
power to 13.8V DC power and can supply up to 15
amps of continuous power.
Output Current .......................................15 Amps DC continuous (max.)
Line Regulation ............................................................... Less Than ±1%
Load Regulation .............................................................. Less Than ±5%
Water and Moisture — Do not use this appliance near water (for example, near
a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool).
3. Turn the red and black binding output posts
counterclockwise to expose the wire holes.
Mounting Accessories — Do not place appliance on an unstable cart, stand,
tripod, bracket, or table. The appliance may fall, causing injury to a child or
adult, and damage the appliance. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer or sold with the appliance. Follow
the manufacturer’s mounting instructions, and use a recommended mounting
accessory.
Overload Protection..........................................................................Fuse,
6.3A/250V
Output Ripple .......................................................................... 200mVRMS
Design............................................................................... Switching Type
Operating Temperature.......................................32° to 104°F (0° to 40°C)
Storage Temperature .....................................–4° to 140°F (–20° to 60°C)
Input Cable .......................................................18 AWG x 3C, SVT 6 Feet
Output Terminal ......................................Binding Post 10 Amp/125 Volts
Power Switch .................................................. Illuminated, 10A/250 VAC
Dimensions (HWD)........................................... 65/16 x 615/16 x 23/16 inches
(160 x 176.5 x 55 mm)
Ventilation — Slots and openings in the cabinet provide ventilation, ensure
reliable operation, and protect from overheating. Do not block or cover these
openings, and do not place the appliance on a bed, sofa, rug, or other similar
surface. Do not place the appliance in a built-in installation such as a bookcase
or rack unless it provides proper ventilation as specified by the manufacturer.
Heat — The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances that produce heat.
Power Sources — Use this appliance with the power source indicated on its
marking label. If you are not sure of your home’s power type, consult your
appliance dealer or local power company.
POWER
Grounding or Polarization — This appliance is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug will only fit
into a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
black binding post
red binding post
Weight ........................................................................................... 3.08 Ibs
(1.4 kgs)
4. Insert the device’s positive wire (usually red)
into the red binding post’s wire hole. Tighten the
binding post to secure the wire in place.
Specifications are typical; individual units might vary. Specifications
are subject to change and improvement without notice.
Power-Cord Protection — Route power-supply cords so they are not likely to
be walked on or pinched by items placed on or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
5. Insert the device’s negative wire (usually black)
into the black binding post’s wire hole. Tighten the
binding post to secure the wire in place.
Cleaning — The appliance should be cleaned only as recommended by the
manufacturer. Clean by wiping with a cloth slightly dampened with water. Avoid
getting water inside the appliance.
the FCC wants you to know
Power Lines — An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching power lines or circuits, as
contact with them might be fatal.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
6. Connect the power supply’s AC cord to a standard
120V AC outlet.
Nonuse Periods — The appliance’s power cord should be unplugged from the
outlet when it is to be left unused for a long period of time.
To avoid damage to the power supply and device:
Overloading — Do not overload wall outlets, extension cords, or integral
convenience receptacles. This can result in fire or electric shock.
• Make sure your connections match the correct polarity
(+ to +, – to – ).
Note: Actual product may vary from the images shown in this
document.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Objects and Liquids — Never spill liquids or push objects of any kind into this
appliance through openings, as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
• Do not let the ends of the positive and negative wires
touch each other.
Carts and Stands — If the appliance is used with a cart or stand, the cart or
stand should be a type recommended by the manufacturer. An appliance and
cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces cause the appliance and cart combination to overturn.
what’s included
• The binding posts’ wire holes can accommodate wire up
to 18 gauge.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult your local RadioShack store or an experienced radio/TV
technician for help.
power supply
user’s guide
Damage Requiring Service — Refer servicing to qualified service personnel
under these conditions:
*
*
*
*
When the power-supply cord or plug is damaged.
Liquid was spilled or objects fell in the appliance.
If the appliance has been exposed to rain or water.
If the appliance does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions, as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the appliance to normal operation.
using your power supply
If you cannot eliminate the interference, the FCC requires that you
stop using your power supply. Changes or modifications not expressly
approved by RadioShack may cause interference and void the user’s
authority to operate the equipment.
Press POWER to turn on the power supply. If POWER
does not light:
*
*
If the appliance has been dropped or damaged.
When there a distinct change in performance.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Check your connections and confirm the AC
outlet has power.
• If the outlet has power, turn off the power
supply and reduce the load (use a device that
requires 13.8V DC or less). Press POWER.
Servicing — Do not attempt to service this appliance yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Replacement Parts — When replacement parts are needed, use only parts
specified by the manufacturer or parts with the same characteristics as the
original part. Substitutions may result in fire or electric shock.
limited 90-day warranty
Safety Check — Upon completion of service or repairs, ask the service
technician to perform safety checks to determine if the appliance is in operating
condition.
Your power supply’s overload protection circuit
automatically shuts down the power supply when
it becomes overloaded. It resets when you turn off
the power supply.
This product is warranted by RadioShack against manufacturing defects in material and
workmanship under normal use for ninety (90) days from the date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and dealers.
For complete warranty details and exclusions, check with your local RadioShack store.
Lightning — For added protection during a lightning storm, or when the
appliance is unused for long periods of time, unplug it from the wall outlet. This
prevents damage due to lightning and power surges.
Attachments — Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102
04/04
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
22-508
07A04
Printed in China
Wall or Ceiling Mounting — The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
|