4-285-921-12(1)
The software of this player may be updated in the future. For information about any
available updates and the latest Operating Instructions, please visit the following website:
Operating Instructions
Blu-ray Disc™ / DVD Player
BDP-S380/BX38
4-285-921-12(1)
Printed in Malaysia
© 2011 Sony Corporation
FCC WARNING
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
The shielded Interface cable (LAN cable) must be
used with the equipment in order to comply with the
limits for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
The AC power cord must be changed only at a qualified
service shop.
b
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Batteries or batteries installed apparatus shall not be
exposed to excessive heat such as sunshine, fire or the
like.
CAUTION
The use of optical instruments with this product will
increase eye hazard. As the laser beam used in this Blu-
ray Disc/DVD player is harmful to eyes, do not attempt
to disassemble the cabinet.
Refer servicing to qualified personnel only.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
This label is located on the laser protective housing
inside the enclosure.
– Consult the dealer or an experienced radio/TV
technician for help.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11)Only use attachments/accessories specified by the
manufacturer.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the
appliance.
Precautions
• To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
• Install this unit so that the AC power cord can be
unplugged from the wall socket immediately in the
event of trouble.
2
12)Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as
a rug that might block the ventilation holes.
• Do not install this player in a confined space, such
as a bookshelf or similar unit.
• Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place the player outdoors, in vehicles, on
ships, or on other vessels.
• If the player is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lenses inside the
player. Should this occur, the player may not
operate properly. In this case, remove the disc and
leave the player turned on for about half an hour
until the moisture evaporates.
• Do not install the player in an inclined position. It
is designed to be operated in a horizontal position
only.
13)Unplug this apparatus during lightning storms or
when unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Owner’s Record
The model and serial numbers are located at the rear of
the unit. Record the serial number in the space provided
below. Refer to them whenever you call upon your
Sony dealer regarding this product.
• This player should be installed and operated with
a minimum distance of at least 20 cm or more
between the player and a person’s body
(excluding extremities: hands, wrists, feet and
ankles).
Model No.______________
Serial No.______________
• Do not place heavy or unstable objects on the
player.
• Do not place any objects other than discs on the
disc tray. Doing so may cause damage to the
player or the object.
• Take out any discs when you move the player. If
you don’t, the disc may be damaged.
• Disconnect the AC power cord and all other
cables from the player when you move the player.
For customers in the USA
If this product is not working properly, please call
1-866-909-7669.
For Customers in Canada
If this product is not working properly, please contact
our Customer Information Service Center at
1-877-899-7669 or write to us at: Customer
Information Service 115 Gordon Baker Road, Toronto,
Ontario, M2H 3R6
On power sources
• The player is not disconnected from the AC
power source as long as it is connected to the wall
outlet, even if the player itself has been turned off.
• Disconnect the player from the wall outlet if you
are not going to use the player for a long time. To
disconnect the AC power cord, grasp the plug
itself; never pull the cord.
• Observe following points to prevent the AC
power cord being damaged. Do not use the AC
power cord if it is damaged, as doing so may
result in an electric shock or fire.
Precautions
This equipment has been tested and found to
comply with the limits set out in the EMC Directive
using a connection cable shorter than 3 metres.
The power requirements and power consumption of
this player are indicated on the back of the player.
Check that the player’s operating voltage is
identical with your local power supply.
– Do not pinch the AC power cord between the
player and wall, shelf, etc.
– Do not put anything heavy on the AC power
cord or pull on the AC power cord itself.
Power requirements and power
consumption
m
For the model supplied with the AC plug
adaptor
If the AC plug of your unit does not fit into the wall
outlet, attach the supplied AC plug adaptor.
,continued
3
If you have any questions or problems concerning
your player, please consult your nearest Sony
dealer.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, your ears and the speakers may
be damaged when a peak level section is played.
Copy Protection
Please be advised of the advanced content
protection systems used in both Blu-ray Disc™ and
DVD media. These systems, called AACS
(Advanced Access Content System) and CSS
(Content Scramble System), may contain some
restrictions on playback, analog output, and other
similar features. The operation of this product and
the restrictions placed may vary depending on the
date of purchase, as the governing board of the
AACS may adopt or change its restriction rules
after the time of purchase.
On cleaning
Clean the cabinet, panel, and controls with a soft
cloth. Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzine.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause the
apparatus to malfunction.
On replacement of parts
In the events that this player is repaired, repaired
parts may be collected for reuse or recycling
purposes.
Copyrights and Trademarks
• “AVCHD” and the “AVCHD” logo are
trademarks of Panasonic Corporation and Sony
Corporation.
• Java, the coffee cup logo, and all Java based
marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the U.S. or other
countries.
On connecting to the HDMI OUT jack
Observe the following as improper handling may
damage the HDMI OUT jack and the connector.
• Carefully align the HDMI OUT jack on the rear
of the player and the HDMI connector by
checking their shapes. Make sure the connector is
not upside down or tilted.
•
, “XMB,” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
• This product incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the
United States and other countries.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,”
“DVD+R,” “DVD-R,” “DVD VIDEO,” and
“CD” logos are trademarks.
• “BD-LIVE,” “BD-LIVE” logo, and
“BONUSVIEW” are trademarks of Blu-ray Disc
Association.
• Be sure to disconnect the HDMI cable when
moving the player.
• “x.v.Color” and “x.v.Color” logo are trademarks
of Sony Corporation.
• “BRAVIA” is a trademark of Sony Corporation.
• “PhotoTV HD” and the “PhotoTV HD” logo are
trademarks of Sony Corporation.
• MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
• Hold the HDMI connector straight when
connecting or disconnecting the HDMI cable. Do
not twist or force the HDMI connector into the
HDMI OUT jack.
IMPORTANT NOTICE
,continued to page 6
Caution: This player is capable of holding a
still video image or on-screen display image on
your television screen indefinitely. If you leave
the still video image or on-screen display
image displayed on your TV for an extended
period of time you risk permanent damage to
your television screen. Plasma display panel
televisions and projection televisions are
susceptible to this.
4
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 2: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Playing from a USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Playing via a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
[Screen Settings] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
[Audio Settings] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
[BD/DVD Viewing Settings] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
[Music Settings] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
[Network Settings] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
[Easy Setup] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
[Resetting] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5
• Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product contains technology subject to
certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of
this product is prohibited without the appropriate
license(s) from Microsoft.
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady technology
to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to
properly enforce restrictions on content usage,
content owners may require Microsoft to revoke
the device’s ability to consume PlayReady-
protected content. Revocation should not affect
unprotected content or content protected by other
content access technologies. Content owners may
require you to upgrade PlayReady to access their
content. If you decline an upgrade, you will not be
able to access content that requires the upgrade.
®
• This product meets ENERGY STAR guidelines
for energy efficiency.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks. ENERGY STAR is a
registered mark owned by the U.S. government.
• Music and video recognition technology and
®
related data are provided by Gracenote .
Gracenote is the industry standard in music
recognition technology and related content
delivery. For more information, please visit
CD, DVD, Blu-ray Disc, and music and video-
related data from Gracenote, Inc., copyright ©
2000-present Gracenote. Gracenote Software,
copyright © 2000-present Gracenote. One or
more patents owned by Gracenote apply to this
product and service. See the Gracenote website
for a nonexhaustive list of applicable Gracenote
patents. Gracenote, CDDB, MusicID,
MediaVOCS, the Gracenote logo and logotype,
and the “Powered by Gracenote” logo are either
registered trademarks or trademarks of Gracenote
in the United States and/or other countries.
• All other trademarks are trademarks of their
respective owners.
• Other system and product names are generally
trademarks or registered trademarks of the
manufacturers. ™ and ® marks are not indicated
in this document.
6
Guide to Parts and Controls
Front panel
z
The N button has a tactile dot. Use the tactile dot as a reference when operating the player.
A Disc tray
F x (stop)
B Power indicator
Lights up in white when the player is
turned on.
G N (play)
H Z (open/close)
I [/1 (on/standby)
Turns on the player, or sets to standby
mode.
C Remote sensor
D Front panel display
N, X: Lights up during playback or
pause.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it being
opened by mistake.
: Lights up when enabling the repeat
setting.
: Lights up when outputting 720p/
1080i/1080p video signals.
When the player is turned on, hold down N
on the player for more than 10 seconds. The
disc tray is locked or unlocked.
E
(USB) jack
Connect a USB device to this jack.
Rear panel
A LINE OUT (R-AUDIO-L) jacks
B LINE OUT (VIDEO) jack
C HDMI OUT jack
E
(USB) jack
F DIGITAL OUT (COAXIAL) jack
G COMPONENT VIDEO OUT
(Y, PB, PR) jacks
D LAN (100) terminal
,continued
7
A Z OPEN/CLOSE
Remote
Opens or closes the disc tray.
-TV- INPUT
Switches between TV and other input
sources.
The available functions of the remote differ
depending on the disc or the situation.
-TV- [/1 (on/standby)
Turns on the TV, or sets to standby mode.
[/1 (on/standby)
Turns on the player, or sets to standby
mode.
B Number buttons (0 - 9)
Enters the title/chapter numbers, etc.
VOL +/–
Adjusts the TV volume.
Selects the language track when multi-
lingual tracks are recorded on BD-
ROMs/DVD VIDEOs.
Selects the sound track on CDs.
Selects the subtitle language when multi-
lingual subtitles are recorded on BD-
ROMs/DVD VIDEOs.
Displays the playback information on the
screen.
C Color buttons (YELLOW/BLUE/
RED/GREEN)
Shortcut keys for interactive functions.
D TOP MENU
Opens or closes the BD’s or DVD’s Top
Menu.
POP UP/MENU
Opens or closes the BD-ROM’s Pop-up
Menu, or the DVD’s menu.
z
• Number 5, AUDIO, VOL +, and N PLAY
buttons have a tactile dot. Use the tactile dot as a
reference when operating the player.
• Gray-colored buttons glow in the dark (BDP-
BX38 only).
The options menu that can be selected
appears on the screen.
HOME
The player automatically returns to
standby mode
If any button on the player or remote is not
pressed for more than 30 minutes, the player
automatically returns to standby mode.
Enters the player’s home menu.
Displays the wall paper when pressed on
the category icon of the home menu.
RETURN
Returns to the previous display.
8
</M/m/,
Moves the highlight to select a displayed
item.
Home menu display
The home menu appears when you press
HOME. Select a category using </,.
Select an item using M/m, and press ENTER.
Center button (ENTER)
Enters the selected item.
E . PREV/NEXT >
Skips to the previous/next chapter, track,
or file.
Item
Category
X PAUSE
Pauses or re-starts playback.
m/M (fast reverse/fast
forward)
• Fast reverses/fast forwards the disc
when pressed during playback. Each
time you press the button during
playback of videos, the search speed
changes.
[Setup]: Adjusts the player settings.
[Photo]: Displays photos.
[Music]: Plays music.
[Video]: Plays videos.
[Network]: Displays network items.
• Plays in slow motion, when pressed for
more than one second in pause mode.
• Plays one frame at a time, when pressed
briefly in pause mode.
N PLAY
Starts or re-starts playback.
NETFLIX (page 14)
Accesses the “NETFLIX” online service.
x STOP
Stops playback and remembers the stop
point (resume point).
The resume point for a title/track is the
last point you played or the last photo for
a photo folder.
QRIOCITY
Accesses the “Qriocity” online service.
9
Hookups and Settings
Step 1: Connecting the Player
Do not connect the AC power cord until you have made all the connections.
For supplied accessories, see “Supplied accessories” (page 23).
Connecting to your TV
Select one of the following connection methods according to the input jacks on your TV.
Match the color of the plug to that of the jack when connecting.
High quality
*1
HDMI cable
Audio/video cable (supplied)
*2
Component video cable
(not supplied)
Audio/video cable (supplied)
Standard
quality
*1
*2
Protected content on BD-ROMs is output at 480i resolution from the COMPONENT VIDEO OUT jack
b
Do not connect the player through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
10
Connecting to your AV amplifier (receiver)
Select one of the following connection methods according to the input jacks on your AV
amplifier (receiver). When you select A or B, make the appropriate settings in the [Audio
Settings] setup (page 17).
*1
HDMI cable
HDMI cable
(not supplied)
Coaxial digital cable (not supplied)
*2
*3
Audio/video cable (supplied)
*1
*2
*3
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other U.S.
and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks, &
DTS-HD, DTS-HD Master Audio, and the DTS
logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights
Reserved.
11
Step 2: Easy Setup
Connecting to the
Network
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the player.
1 Insert two Size AA (R6) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment.
LAN cable
(not supplied)
Broadband
router
ADSL modem/
Cable modem
Internet
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
2 Plug the player into the AC outlet.
To set the network settings
Select[Network Settings], [InternetSettings],
on-screen instructions to complete the setup.
to AC outlet
3 Press [/1 to turn on the player.
USB Wireless Setup
Turn off the player, then connect the USB
Wireless LAN Adapter (UWA-BR100 only
available as of October 2010) to the USB jack
on the front or rear of the player.
b
The USB Wireless LAN Adapter may not be
available in some regions/countries.
4 Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
USB Wireless
LAN Adapter
5 Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using </M/m/
, and ENTER on the remote.
LAN cable
(not supplied)
Wireless LAN ADSL modem/ Internet
router
Cable modem
</M/m/,
To set the network settings
ENTER
Select [Network Settings], [Internet
Settings], then [USB Wireless Setup]
(page 20), and follow the on-screen
instructions to complete the setup.
12
3 Insert a BD-ROM with BONUSVIEW/
BD-LIVE.
Playback
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
Playing a Disc
z
For playable discs, see “Playable discs”
To delete data in the USB memory, select [Erase BD
Data] in the
[Video], and press ENTER. All data
stored in the buda folder will be erased.
1 Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
Displaying the play information
2 Press Z OPEN/CLOSE, and place a
You can check the playback information,
etc., by pressing DISPLAY.
disc on the disc tray.
The displayed information differs depending
on the disc type and player status.
Example: when playing a BD-ROM
Playing side facing down
3 Press Z OPEN/CLOSE to close the
disc tray.
Playback starts.
If playback does not start automatically,
select
or
ENTER.
in the
[Video],
[Music],
[Photo] category, and press
A Output resolution/Video frequency
B Title number or name
C The currently selected audio setting
Enjoying BONUSVIEW/BD-LIVE
D Available functions (
angle,
Some BD-ROMs with the “BD-LIVE” logo*
have bonus content and other data that can be
downloaded for enjoyment.
audio,
subtitle)
E Playback information
Displays the Play mode, Playing status
bar, Disc type, Video codec, Bitrate,
Repeat type, Elapsed time, and Total
playing time.
*
1 Connect a USB memory to the USB
jack on the rear of the player (page 7).
As your local storage, use a 1 GB or
larger USB memory.
F Chapter number
G The currently selected angle
2 Prepare for BD-LIVE (BD-LIVE only).
• Connect the player to a network
• Set [BD Internet Connection] to
[Allow] (page 18).
13
2 Select
[Photo] on the home menu using
</,.
[Video],
[Music], or
Playing from a USB
Device
3 Select an Internet content provider
icon using M/m, and press ENTER.
When an Internet content list has not
been acquired, an unacquired icon or a
new icon is displayed.
You can play video/music/photo files on the
connected USB device.
For playable USB devices, see “Playable
1 Connect the USB device to the USB
jack on the player.
To use the control panel
The control panel appears when the video file
starts playing. The displayed items may differ
depending on Internet content providers.
To display again, press DISPLAY.
Refer to the instruction manual supplied
with the USB device before connecting.
USB device
A Control display
2 Select
[Photo] on the home menu using
</,.
[Video],
[Music], or
Press </M/m/, or ENTER for
playback operations.
B Playing status bar
Status bar, Cursor indicating the
current position, Playing time,
Duration of the video file
3 Select
[USB device] using M/m,
and press ENTER.
C Network condition
indicates the signal strength for
wireless connection.
indicates a wired connection.
D Network transmission speed
E The next video file name
Playing via a Network
Streaming BRAVIA Internet
Video
F The currently selected video file name
Serves as a gateway delivering the selected
Internet content and a variety of on-demand
entertainment straight to your player.
z
• Some Internet content requires registration via a
PC before it can be played. For further details,
visit the following website:
• Some Internet content may not be available in
some regions/countries.
1 Prepare for BRAVIA Internet Video.
Connect the player to a network
14
Items
Details
Available Options
Various settings and playback operations are
available by pressing OPTIONS. The
available items differ depending on the
situation.
[Pause]
[Top Menu]
Pauses the playback.
Displays the BD’s or DVD’s
Top Menu.
[Menu/Popup Displays the BD-ROM’s
Menu]
Pop-up Menu or DVD’s
menu.
Common options
[Title Search] Searches for a title on BD-
ROMs/DVD VIDEOs and
starts playback from the
beginning.
Items
Details
[Playback
History List]
Displays a title in playback
history of BD-ROM/DVD-
ROM/CD-DA based on
Gracenote technology.
[Chapter
Search]
Searches for a chapter and
starts playback from the
beginning.
[Repeat
Setting]
Sets the repeat mode.
[Angle]
Switches to other viewing
angles when multi-angles
are recorded on BD-ROMs/
DVD VIDEOs.
[Favorites List] Displays the Favorites List.
[Play/Stop]
Starts or stops the playback.
[IP Content
Noise
Adjusts the picture quality of
Internet content.
[Play from
beginning]
Plays the item from the
beginning.
Reduction]
[Information
Display]
Displays information on the
BD-ROM/DVD-ROM/CD-
DA based on Gracenote
technology.
[Music] only
Items
Details
[Database
Browser]
Searches for related
information based on
keywords acquired from
Gracenote on the
[Add
Slideshow
BGM]
Registers music files in the
USB memory as slideshow
background music (BGM).
[Information Display].
[Photo] only
[Search
Contents]
Searches for BRAVIA
Internet Video content based
on keywords acquired from
Gracenote on the
Items
Details
[Slideshow
Speed]
Changes the slideshow
speed.
[Information Display].
[Slideshow
Effect]
Sets the effect for
slideshows.
[Add to
Adds Internet content to the
Favorites List.
Favorites]
[Slideshow
BGM]
• [Off]: Turns off the
function.
• [My Music from USB]:
Sets the music files
registered in [Add
[Remove from Removes Internet content
Favorites]
from the Favorites List.
[Video] only
Slideshow BGM]. If no
music file is registered,
[(Not registered)] is
displayed.
• [Play from Music CD]:
Sets the tracks in CD-DAs.
Items
Details
[A/V SYNC]
Adjusts the gap between
picture and sound, by
delaying the sound output in
relation to the picture output
(0 to 120 milliseconds).
[Slideshow]
[Rotate Left]
Plays a slideshow.
[Video
Settings]
• [Picture Quality Mode]:
Selects the picture settings
for different lighting
environments.
Rotates the photo
counterclockwise by
90 degrees.
• [BNR]: Reduces the
mosaic-like block noise in
the picture.
[Rotate Right] Rotates the photo clockwise
by 90 degrees.
• [MNR]: Reduces minor
noise around the picture
outlines (mosquito noise).
15
Icon
Explanation
[Easy Setup] (page 20)
Re-runs the Easy Setup to make
the basic settings.
Settings and Adjustments
Using the Settings
Displays
[Resetting] (page 20)
Resets the player to the factory
settings.
Select
[Setup] on the home menu when
you need to change the settings of the player.
The default settings are underlined.
[Network Update]
1 Select
[Setup] on the home menu
using </,.
Select [OK] to update the player’s software
via the network.
2 Select the setup category icon using
M/m, and press ENTER.
z
• We recommend the network update every 2
months or so.
• For information about update functions, visit the
following website:
Icon
Explanation
[Network Update] (page 16)
Updates the software of the
player.
[Screen Settings] (page 16)
Makes the video settings
according to the type of
connecting jacks.
[Screen Settings]
[Audio Settings] (page 17)
Makes the audio settings
according to the type of
connecting jacks.
x [TV Type]
[16:9]: Select this when connecting to a
wide-screen TV or a TV with a wide mode
function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide mode function.
[BD/DVD Viewing Settings]
Makes detailed settings for BD/
DVD playback.
x [Screen Format]
[Parental Control Settings]
Makes detailed settings for the
Parental Control function.
[Original]: Select this when connecting to a
TV with a wide mode function. Displays a
4:3 screen picture in 16:9 aspect ratio even
on a wide-screen TV.
[Fixed Aspect Ratio]: Changes the picture
size to fit the screen size with the original
picture aspect ratio.
[Music Settings] (page 19)
Makes detailed settings for
Super Audio CD playback.
[System Settings]
Makes the player-related
settings.
[Network Settings]
Makes detailed settings for the
Internet and network.
16
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with
black bands on the top and bottom.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected
TV type, and switches to the matching color
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Outputs RGB video signals.
[Pan & Scan]: Displays a full-height picture
on the entire screen, with trimmed sides.
x [HDMI Deep Color Output]
[Auto]: Normally select this.
[16bit], [12bit], [10bit]: Outputs 16bit/12bit/
10bit video signals when the connected TV
is compatible with Deep Color.
[Off]: Select this when the picture is unstable
or colors appear unnatural.
x [Cinema Conversion Mode]
[Auto]: Normally select this. The player
automatically detects whether the material is
video-based or film-based, and switches to
the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
x [Pause Mode]
[Auto]: Normally select this. Dynamic
moving pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
x [Output Video Format]
[HDMI]: Normally select [Auto].
Select [Original Resolution] to output the
resolution recorded on the disc. When the
resolution is lower than the SD resolution, it
is scaled up to the SD resolution.
[Component Video]: Select the resolution
that suits your TV.
[Audio Settings]
x [Audio (HDMI)]
[Auto]: Normally select this. Outputs audio
signals according to the status of the
connected HDMI device.
[PCM]: Outputs PCM signals from the
HDMI OUT jack.
[Video]: Automatically sets the lowest
resolution.
z
x [DSD Output Mode]
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
[Component Video].
• If no picture appears when setting [HDMI] or
[Component Video] resolution, try another
resolution setting.
• When connecting via the COMPONENT
VIDEO OUT jack and [Component Video] is
selected, BD-ROM playback of protected
content is only supported at 480i output
[On]: Outputs DSD signals from the HDMI
OUT jack when playing a Super Audio CD.
When [On] is selected, no signal is output
from other jacks.
[Off]: Outputs PCM signals from the HDMI
OUT jack when playing a Super Audio CD.
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing
the interactive and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this to output HD audio signals to an AV
amplifier (receiver).
x [BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
,continued
17
x [Dolby Digital]
[Downmix PCM]: Converts to output Linear
PCM signals. Select this when connecting an
audio device without a built-in Dolby Digital
decoder.
[BD/DVD Viewing
Settings]
[Dolby Digital]: Select this when connecting
an audio device with a built-in Dolby Digital
decoder.
x [BD/DVD Menu]
Selects the default menu language for BD-
ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 26).
x [DTS]
[Downmix PCM]: Converts to output Linear
PCM signals. Select this when connecting to
an audio device without a built-in DTS
decoder.
x [Audio]
Selects the default track language for BD-
ROMs or DVD VIDEOs.
[DTS]: Select this when connecting to an
audio device with a built-in DTS decoder.
When you select [Original], the language
given priority in the disc is selected.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 26).
x [DTS Neo:6]
[Cinema]: Outputs simulated multichannel
sound from 2 channel sources via the HDMI
OUT jack according to the capability of the
connected device using DTS Neo:6 Cinema
mode.
[Music]: Outputs simulated multichannel
sound from 2 channel sources via the HDMI
OUT jack according to the capability of the
connected device using DTS Neo:6 Music
mode.
x [Subtitle]
Selects the default subtitle language for BD-
ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 26).
[Off]: Outputs sound with its original
number of channels via the HDMI OUT
jack.
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x [Audio DRC]
[Auto]: Performs playback at the dynamic
range specified by the disc (BD-ROM only).
Other discs are played back at the [On] level.
[On]: Performs playback at a standard
compression level.
x [BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet
connection.
[Off]: No compression works. A more
dynamic sound is produced.
x [Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS Neo:6.
[Stereo]: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS Neo:6.
[Parental Control
Settings]
x [Password]
Sets or changes the password for the Parental
Control function. A password allows you to
set a restriction on BD-ROM or DVD
VIDEO, and Internet video playback. If
necessary, you can differentiate the
restriction levels for BD-ROMs, DVD
VIDEOs, and Internet videos.
18
x [Parental Control Area Code]
Playback of some BD-ROMs, DVD
VIDEOs, or Internet videos can be limited
according to the geographic area. Scenes
may be blocked or replaced with different
scenes. Follow the on-screen instructions
and enter your four-digit password.
[System Settings]
x [OSD]
Selects your language for the player on-screen
displays.
x [Dimmer]
[Bright]: Bright lighting.
[Dark]: Low lighting.
[Off]: Turns off the lighting during playback.
Low lighting other than during playback.
x [BD Parental Control]
Playback of some BD-ROMs can be limited
according to the age of the users. Scenes may
be blocked or replaced with different scenes.
Follow the on-screen instructions and enter
your four-digit password.
x [Control for HDMI]
[On]: The following BRAVIA Sync features
are available:
–One-Touch Play
–System Power-Off
x [DVD Parental Control]
Playback of some DVD VIDEOs can be
limited according to the age of the users.
Scenes may be blocked or replaced with
different scenes. Follow the on-screen
instructions and enter your four-digit
password.
–Language Follow
[Off]: Turns off the function.
z
x [Internet Video Parental Control]
Playback of some Internet videos can be
limited according to the age of the users.
Scenes may be blocked or replaced with
different scenes. Follow the on-screen
instructions and enter your four-digit
password.
For details, refer to the instruction manual
supplied with the TV or components.
x [HDMI: Linked to TV-off]
[On]: Automatically turns off the player and
HDMI-compatible components when the
connected TV enters standby mode
(BRAVIA Sync).
x [Internet Video Unrated]
[Allow]: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated
Internet videos.
[Off]: Turns off the function.
x [Quick Start Mode]
[On]: Shortens the startup time when turning
on the player.
[Off]: Reduces standby power consumption.
x [Auto Display]
[On]: Automatically displays information on
the screen when changing the viewing titles,
picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
[Music Settings]
x [Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio
CD layer.
x [Screen Saver]
[On]: Turns on the screen saver function.
The screen saver image appears when you do
not use the player for more than 10 minutes
while an on-screen display is displayed.
[Off]: Turns off the function.
[CD]: Plays the CD layer.
x [Super Audio CD Playback Channel]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]: Plays the multi-channel area.
x [Software Update Notification]
[On]: Sets the player to inform you of newer
[Off]: Turns off the function.
,continued
19
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when disc playback stops.
Connect to the network for downloading.
[Manual]: Downloads the disc information
when [Playback History List] or
[Information Display] is selected in the
options menu.
[Resetting]
x [Reset to Factory Default Settings]
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
x [System Information]
Displays the player’s software version
information and the MAC address.
x [Initialize Personal Information]
You can erase your personal information stored
in the player.
[Network Settings]
x [Internet Settings]
Connect the player to the network
beforehand. For details, see “Connecting to
[View Network Status]: Displays the current
network status.
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[USB Wireless Setup]: Select this when you
use a USB Wireless LAN Adapter.
z
For further details, visit the following
website and check the FAQ contents:
x [Network Connection Diagnostics]
You can run the network diagnostic to check
if the network connection has been made
properly.
x [Media Remote Device Registration]
Registers your “Media Remote” device.
x [Registered Media Remote Devices]
Displays a list of the registered your “Media
Remote” devices.
[Easy Setup]
Re-runs the [Easy Setup] to make the basic
settings. Follow the on-screen instructions.
20
Sound
Additional Information
There is no sound or the sound is not
output correctly.
, Check that all the connecting cables are
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
, Switch the input selector on your AV
amplifier (receiver) so that the audio signals
of the player are output from your AV
amplifier (receiver).
, If the audio signal does not come through
the DIGITAL OUT (COAXIAL)/HDMI
OUT jack, check the audio settings
, For HDMI connections, try the following:
1Turn the player off and on again. 2Turn
the connected equipment off and on again.
3Disconnect and then reconnect the HDMI
cable.
, For HDMI connections, if the player is
connected to a TV through an AV amplifier
(receiver), try connecting the HDMI cable
directly to the TV. Refer also to the
instruction manual supplied with the AV
amplifier (receiver).
Picture
There is no picture or the picture is not
output correctly.
, Check that all the connecting cables are
securely connected (page 10).
, Switch the input selector on your TV to
display the signal from the player.
, Reset the video output resolution to the
lowest resolution by pressing x on the
player for more than 10 seconds.
, For HDMI connections, try the following:
1Turn the player off and on again. 2Turn
the connected equipment off and on again.
3Disconnect and then reconnect the HDMI
cable.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
, The device connected to the HDMI OUT
jack does not support the audio format of
the player. Check the audio settings
, The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
, For HDMI connections, check the [Output
Video Format] settings in the [Screen
Settings] setup (page 17).
, When the analog signals are also output, set
[BD/DVD-ROM 1080/24p Output] to [Off]
, For BD-ROMs, check the [BD/DVD-ROM
1080/24p Output] setting in the [Screen
Settings] setup (page 17).
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio,
and DTS-HD Master Audio) is not output
by bitstream.
, Set [BD Audio MIX Setting] to [Off] in the
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
The display language on the screen
switches automatically when connected to
The interactive audio is not output.
, Set [BD Audio MIX Setting] to [On] in the
the HDMI OUT jack.
, When [Control for HDMI] is set to [On]
(page 19), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
Disc
The disc does not play.
, The disc is dirty or skewed.
, The disc is upside down. Insert the disc with
the playback side facing down.
,continued
21
, The disc has a format that cannot be played
, The player cannot play a recorded disc that
is not correctly finalized.
, The region code on the BD or DVD does
not match the player.
Control for HDMI (BRAVIA Sync)
The [Control for HDMI] function does not
work (BRAVIA Sync).
, Check that [Control for HDMI] is set to
, If you change the HDMI connection, turn
the player off and on again.
USB device
, If power failure occurs, set [Control for
HDMI] to [Off], then set [Control for
, Check the following and refer to the
instruction manual supplied with the
component.
The player does not detect a USB device
connected to the player.
, Make sure that the USB device is securely
connected to the USB jack.
, Check if the USB device or a cable is
damaged.
, Check if the USB device is on.
, If the USB device is connected via a USB
hub, connect the USB device directly to the
player.
– the connected component is compatible
with the [Control for HDMI] function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
BRAVIA Internet Video
The picture/sound is poor/certain
programs display a loss of detail,
especially during fast-motion or dark
scenes.
, Picture/sound quality may be poor
depending on Internet content providers.
, Picture/sound quality may be improved by
changing the connection speed. We
recommend a connection speed of at least
2.5 Mbps for standard definition video
(10 Mbps for high definition video).
, Not all videos will contain sound.
– if you change the HDMI connection,
disconnect and reconnect the AC power
cord, or a power failure occurs, try the
following: 1Switch the input selector of
the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen. 2Set [Control for HDMI] to
[Off], then set [Control for HDMI] to
manual supplied with the AV amplifier
(receiver).
The picture is small.
, Press M to zoom in.
The System Power-Off function does not
work (BRAVIA Sync).
, Check that [Control for HDMI] and
[HDMI: Linked to TV-off] are set to [On]
Network connection
The player cannot connect to the network.
and the network settings (page 20).
Others
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
beginning].
The message [A new software version is
available. Please go to the “Setup”
section of the menu and select “Network
update” to perform the update.] appears
on the screen when turning the player on.
the player to a newer software version.
22
Playback does not start from the resume
point where you last stopped playing.
, The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
Specifications
System
Laser: Semiconductor laser
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Inputs and outputs
(Jack name:
Jack type/Output level/Load impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT (Y, PB, PR):
Phono jack/Y: 1.0 Vp-p/
The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.
, When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down N on the player until “UNLOCK”
, When “TLK ON” appears, contact your
Sony dealer or local authorized Sony
service facility.
PB, PR: 0.7 Vp-p/75 ohms
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LAN (100):
The disc tray does not open and you
cannot remove the disc even after you
press Z.
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a USB
memory, memory card reader, digital still
camera, and digital video camera)
, Try the following: 1Turn the player off,
and disconnect the AC power cord.
2Reconnect the AC power cord while
pressing down Z on the player. 3Keep
pressing down Z on the player until the tray
opens. 4Remove the disc. 5When
“OPEN” appears on the front panel display,
hold down [/1 on the player for more than
10 seconds until the player turns off.
General
Power requirements:
U.S. and Canada models:
120V AC, 60Hz
Models for other areas:
110-240V AC, 50/60Hz
Power consumption:
18 W
“Exxxx” or “TEM ERR” appears on the
front panel display.
, When “Exxxx” appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
, When “TEM ERR” appears, place the
player in a location with adequate
ventilation to prevent heat build-up in the
player.
Dimensions (approx.):
430 mm × 199 mm × 36 mm
(17 in. × 7 4/5 in. × 1 7/16 in.)
(width/depth/height) incl. projecting parts
Mass (approx.):
1.6 kg (3 lb 9 oz)
Operating temperature:
5 ºC to 35 ºC (41 °F to 95 °F)
Operating humidity:
25 % to 80 %
The player does not respond to any button.
, Moisture has condensed inside the player
, Hold down [/1 on the player for more than
10 seconds until the indicators on the front
panel display turn off.
Supplied accessories
• Audio/video cable (phono plug ×3) (1)
• HDMI cable (1) (BDP-BX38 only)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
A plug adaptor is included with some models.
If the player still does not respond to any
button, disconnect then reconnect the AC
power cord.
Specifications and design are subject to
change without notice.
,continued
23
Notes About the Discs
Playable discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
Dust, fingerprints, or scratches on the disc
may cause it to malfunction.
Blu-ray
Disc*1
DVD*3
BD-ROM
BD-R*2/BD-RE*2
DVD-ROM
DVD-R/DVD-RW
DVD+R/DVD+RW
CD*3
CD-DA (Music CD)
CD-ROM
CD-R/CD-RW
Super Audio CD
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe
the disc from the center out.
*1
Since the Blu-ray Disc specifications are new
and evolving, some discs may not be playable
depending on the disc type and the version.
The audio output differs depending on the
source, connected output jack, and selected
audio settings.
BD-RE: Ver.2.1
BD-R: Ver.1.1, 1.2, 1.3 including organic
pigment type BD-R (LTH type)
The BD-Rs recorded on a PC cannot be played if
postscripts are recordable.
A CD or DVD disc will not play if it has not been
correctly finalized. For more information, refer
to the instruction manual supplied with the
recording device.
*2
*3
• Do not use solvents such as benzine,
thinner, commercially available disc/lens
cleaners, or anti-static spray intended for
vinyl LPs.
• If you have printed the disc’s label, dry the
label before playing.
Discs that cannot be played
• BDs with cartridge
• BDXLs
• DVD-RAMs
• HD DVDs
• DVD Audio discs
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape (e.g.,
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
• PHOTO CDs
• Data part of CD-Extras
• VCDs/Super VCDs
• Audio material side on DualDiscs
• A disc recorded in a color system other than
NTSC, such as PAL (this player conforms
to the NTSC color system).
• Do not resurface the playing side of a disc
to remove surface scratches.
Note on Discs
This product is designed to playback discs
that conform to the Compact Disc (CD)
standard. DualDiscs and some of the music
discs encoded with copyright protection
technologies do not conform to the Compact
Disc (CD) standard, therefore, these discs
may not be playable by this product.
24
Note on playback operations of BDs/DVDs
Some playback operations of BDs/DVDs
may be intentionally set by software
producers. Since this player plays BDs/
DVDs according to the disc contents the
software producers designed, some playback
features may not be available.
Photo
File format
Extensions
JPEG
“.jpg,” “.jpeg”
*1
The player does not play coded files such as
DRM.
The player plays AVCHD format files that are
recorded on a digital video camera, etc. The
AVCHD format disc will not play if it has not
been correctly finalized.
*2
Note about double-layer BDs/DVDs
The playback pictures and sound may be
momentarily interrupted when the layers
switch.
*3
The player does not play coded files such as
Lossless.
b
Region code (BD-ROM/DVD VIDEO only)
Your player has a region code printed on the
rear of the unit and will only play BD-ROMs/
DVD VIDEOs labeled with identical region
• Some files may not play depending on the format,
the encoding, or recording condition.
• Some files edited on a PC may not play.
• The player can recognize the following files or
folders in BDs, DVDs, CDs and USB devices:
– up to folders in the 3rd tree
codes or
ALL
.
– up to 500 files in a single tree
• Some USB devices may not work with this
player.
Region code
• The player can recognize Mass Storage Class
(MSC) devices (such as flash memory or an
HDD), Still Image Capture Device (SICD) class
devices and 101 keyboard (front USB jack only).
• To avoid data corruption or damage to the USB
memory or devices, turn the player off when
connecting or removing the USB memory or
devices.
Playable types of files
Video
File format
Extensions
• The player may not play high bit rate video files
on DATA CDs smoothly. You are recommended
to play such files using DATA DVDs.
MPEG-1 Video/PS*1
MPEG-2 Video/PS,
TS*1
“.mpg,” “.mpeg,”
“.m2ts,” “.mts”
MPEG-4 AVC*1
“.mkv,” “.mp4,”
“.m4v,” “.m2ts,”
“.mts”
About wireless LAN security
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
communication, this player supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
WMV9*1
AVCHD
Xvid
“.wmv,” “.asf”
*2
“.avi”
Music
No Security
File format
Extensions
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your wireless
network, even without any sophisticated
tools. Keep in mind that there is a risk of
unauthorized access or interception of data.
MP3 (MPEG-1 Audio “.mp3”
Layer III)
AAC*1*3
“.m4a”
“.wma”
“.wav”
WMA9 Standard*1*3
LPCM
,continued
25
WEP
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your
wireless network. WEP is a legacy security
technology that enables older devices, which
do not support TKIP/AES, to be connected.
Language code list
For details, see [BD/DVD Viewing Settings]
The language spellings conform to the ISO
639: 1988 (E/F) standard.
WPA-PSK (TKIP), WPA2-PSK (TKIP)
TKIP is a security technology developed to
correct for the deficiencies of WEP. TKIP
assures a higher security level than WEP.
Code Language
1027 Afar
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic;
Kalaallisut
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method that is distinct
from WEP and TKIP.
AES assures a higher security level than
WEP or TKIP.
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian 1300 Kannada
1059 Bulgarian
1060 Bihari
1299 Cambodian;
Khmer
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1313 Latin
1326 Lingala
1327 Laothian; Lao
1332 Lithuanian
1334 Latvian
1345 Malagasy
1347 Maori
1061 Bislama
1066 Bengali
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani;
Dzongkha
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
Code numbers of controllable
TVs
While holding down -TV- [/1, enter the TV
manufacturer’s code using the number
buttons.
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
Manufacturer
Sony
Code number
01 (default)
1358 Malese;
Maltese
Hitachi
02
04
13
04
19
21
16
10
20
18
07
1363 Burmese
1365 Nauru
LG/Goldstar
Mitsubishi/MGA
NEC
1369 Nepali
1376 Dutch
1171 Faroese
1174 French
1181 Frisian
1183 Irish
1379 Norwegian
1393 Occitan
1403 Oromo
1408 Oriya
Panasonic
Philips
1186 Scots Gaelic 1417 Punjabi;
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
Panjabi
1428 Polish
1435 Pashto; Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
Pioneer
RCA
1217 Hindi
Samsung
Sharp
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1482 Kirundi; Rundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
Toshiba
1501 Sangho;
Sango
1257 Hebrew
26
Code Language
1502 Serbo-
Croatian
1503 Singhalese;
Sinhalese
1531 Turkmen
1532 Tagalog
1534 Setswana;
Tswana
1505 Slovak
1506 Slovenian
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1535 Tonga; Tonga
islands
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1513 Siswati; Swati 1564 Urdu
1514 Sesotho;
Sotho southern1581 Vietnamese
1572 Uzbek
1515 Sundanese
1587 Volapük
1613 Wolof
1516 Swedish
1517 Swahili
1521 Tamil
1525 Telugu
1527 Tajik
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1528 Thai
1529 Tigrinya
1703 Not specified
Parental control/area code
For details, see [Parental Control Area Code]
Code Area
2044, Argentina
2047, Australia
2046, Austria
2057, Belgium
2070, Brazil
2333, Luxembourg
2363, Malaysia
2362, Mexico
2376, Netherlands
2390, New Zealand
2379, Norway
2427, Pakistan
2424, Philippines
2428, Poland
2436, Portugal
2489, Russia
2501, Singapore
2149, Spain
2090, Chile
2092, China
2093, Colombia
2115, Denmark
2165, Finland
2174, France
2109, Germany
2200, Greece
2219, Hong Kong
2248, India
2499, Sweden
2086, Switzerland
2543, Taiwan
2238, Indonesia
2239, Ireland
2254, Italy
2276, Japan
2304, Korea
2528, Thailand
2184, United
Kingdom
27
HDMI: Linked to TV-off
Setup 16
Index
HOME 8
SUBTITLE 8
Home menu 16
System Power-Off 19
System Settings 19
A
AUDIO 8
Audio Settings 17
I
T
Internet content 14
IP Content Noise
Reduction 15
TOP MENU 8
Troubleshooting 21
TV Type 16
B
BD/DVD Viewing
Settings 18
L
BD-LIVE 13
BD-R 24
BD-RE 24
Bitstream 21
Blu-ray Disc 24
BONUSVIEW 13
BRAVIA Internet Video
U
Language Follow 19
Update 16
USB 14
M
MAC address 20
Music Settings 19
W
WEP 25
WPA2-PSK (AES) 25
WPA2-PSK (TKIP) 25
WPA-PSK (AES) 25
WPA-PSK (TKIP) 25
N
NETFLIX 9
BRAVIA Sync 22
Network Settings 20
Network Update 16
C
Color buttons 8
Connecting
O
One-Touch Play 19
OPTIONS 8
OSD 19
AV amplifier
(Receiver) 11
Network 12
TV 10
P
Parental Control 18
Parental Control Settings
D
Play information 13
Playable discs 24
POP UP/MENU 8
Deep Color 17
Dimmer 19
DISPLAY 8
Dolby Digital 18
DSD Output Mode 17
DTS 18
Q
QRIOCITY 9
Quick Start Mode 19
E
R
Region code 25
Remote 8
Resetting 20
Resetting the player 20
G
Gracenote Settings 20
H
HDMI 17
S
Screen Settings 16
28
|